# Multiplication Table Subject Area: Math Learning Objectives: Students will learn multiplication using a multiplication table. \ \ Materials Needed: One computer, one Micro or Micro+ 3D printer, and one 250ft 3D Ink filament spool (PLA or ABS-R3 recommended) per 2-5 students. Brief Description: Students will print and assemble a multiplication table. To Prepare: Students will need a computer that has the M3D software on it. We recommend one printer per every 2-5 students. The Micro or Micro+ 3D printer will need to be plugged into both the wall and the computer. Each printer will need to have a 250ft spool feeding into the external port. A spool holder is also recommended. Your students can either print a 5x5 multiplication table or a 9x9 multiplication table. If you need assistance with any of the above please see our guides at support.printm3d.com. Lesson Plan: 1\. Students will go online to: and download either the 5x5 or the 9x9 multiplication table model. 2\. Students will open the M3D Software on a computer, and upload the model. Once uploaded, they will click print. After the model has completed printing, carefully remove it from the print bed. 3\. Students now have a physical multiplication table they can use to help them learn memorize their times tables. --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://education.printm3d.com/lesson-plans/3-5/multiplication-table.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.